Precision metal fabrication · Shah Alam, Selangor
We cut, form and weldsteel to the tenthof a millimetre.
A contract fabrication works for E&E, F&B, construction and OEM buyers — laser cutting, press-brake forming, coded welding and powder-coat finishing under one roof in Shah Alam.
- 22 yrs
- At the bench
- ±0.1 mm
- Held tolerance
- ISO 3834
- Certified welding
Trusted on the lines and sites of buyers across Malaysia
What we do
One works, every process from sheet to shipped assembly
A single accountable fabricator for the whole job — we cut the blank, form it, weld it, finish it and inspect it, so nothing falls between vendors or gets lost in a queue.
- 01
CNC laser & plasma cutting
Fibre-laser and plasma beds cut mild steel, stainless and aluminium up to 20 mm from your DXF or STEP — clean edges, tight nesting and repeatable blanks, prototype quantity through volume.
- 02
Press-brake forming & rolling
CNC press brakes to 170 tonne and plate rolling form brackets, enclosures, chutes and cylinders to drawing, with tooling and bend allowances proven on a first-off before a batch runs.
- 03
Coded welding & assembly
MIG, TIG and spot welding by ASME- and AWS-coded welders under an ISO 3834 welding-quality system — from stainless food-grade seams to structural steel weldments and full sub-assemblies.
- 04
Powder-coat & finishing
In-house shot-blast, pre-treatment and powder-coat line, plus brushing, passivation and silk-screen — parts leave finished, marked and packed, ready to install or fit straight to the line.
- 05
Machining & hardware
CNC milling and turning for machined features, plus PEM insertion, tapping and hardware fitting, so a fabricated part arrives complete rather than needing a second supplier.
- 06
Metrology & inspection
First-article inspection to your drawing, CMM and gauge measurement and documented dimensional reports — with certificates of conformance and material traceability per batch.
The works, in numbers
Capacity you can plan a build around
22
Years fabricating in Selangor
6,500 m²
Covered shop floor
±0.1 mm
Tolerance held, verified by CMM
9
Export markets shipped
How a job runs
From your drawing to a finished, inspected part
One project engineer owns your job from RFQ to despatch, so you always know exactly where it stands.
Enquiry & DFM review
Send a drawing, a sample or a sketch. Our engineers review it for manufacturability — material, gauge, bends, weld access and finish — and return a costed quote, usually within two working days.
Tooling & first-off
We program the nest, prove the bend sequence and produce a first-off article, presented with a dimensional report for your sign-off before any batch is committed.
Fabrication
Approved jobs move to the floor — cut, form, weld and machine — run to a routing card with a coded welder and a fixture where the part needs one.
Finishing
Shot-blast, pre-treatment and powder-coat, brushing or passivation to your spec, then marking and labelling — parts leave the line finished, not raw.
Inspection & traceability
CMM and gauge checks against your drawing, a certificate of conformance and full material traceability with mill certs where the job calls for them.
Delivery
Packed to protect the finish and delivered on schedule or by kanban across the Klang Valley and to nine export markets — on the dates your build actually needs them.
Selected work
Parts and structures we have built and shipped
A sample across the sectors we serve. Some names are withheld where clients ask, but the materials, tolerances and finishes are real.
Food & BeverageFood-grade stainless kitchen line for a QSR chain
A full 304 stainless commissary line — benches, exhaust hoods, shelving and a pass counter — re-fabricated to hygienic-design standard after another shop fell short.
Electronics & E&EPowder-coated electrical enclosures at repeat volume
A family of IP-rated sheet-steel enclosures — cut, formed, welded and powder-coated — supplied on a rolling monthly call-off to an electronics OEM in Shah Alam.
Construction & ArchitectureAluminium facade & louvre system for a KL office tower
Perforated aluminium facade cassettes and sun-shade louvres fabricated to the architect's drawing and finish schedule, delivered in phased site lots.
Industrial EquipmentStructural conveyor frames for a distribution centre
Welded structural steel conveyor supports, walkways and guarding for a Klang Valley logistics automation project, hot-dip galvanised for a 20-year service life.
Oil, Gas & ProcessWelded process skid for a chemical dosing plant
A stainless pipe-spool and pump skid welded by coded welders under a full WPS/PQR régime, with NDT records and material traceability for a process plant in Gebeng.
Automotive & OEMHigh-mix precision brackets held to ±0.1 mm
A family of laser-cut and formed mounting brackets for an automotive tier-2 supplier, held to ±0.1 mm and delivered on scheduled call-offs with FAI on every revision.
What buyers say
Trusted by procurement and engineering teams
“They took over a stainless kitchen line another shop had botched, re-fabricated it to food-grade standard and delivered ahead of our opening. The welds are the cleanest we've had.”
Procurement Manager
F&B chain · Petaling Jaya
“Coded welders, real ISO 3834 paperwork and a project engineer who actually answers the phone. Our enclosures ship on the dates we agree, batch after batch.”
Supply Chain Lead
Electronics OEM · Shah Alam
“From DXF to powder-coated, marked and packed brackets in three weeks, held to ±0.1 mm. We moved our whole bracket programme to Anvil & Arc.”
Manufacturing Engineer
Automotive tier-2 · Rawang
Before you enquire
The questions buyers ask first
No fixed MOQ — we run one-off prototypes, bridge batches and repeat volume production. Set-up cost is simply spread over fewer parts on a small job, and we'll tell you where a larger batch changes the unit price.
Laser-cut and formed parts typically ship in 1–2 weeks; welded and powder-coated assemblies in 2–4 weeks depending on finish and volume. We'll commit to a date at quote and hold to it.
Yes. For repeat programmes we run scheduled or kanban deliveries and can hold finished-goods or raw-material buffer stock against a blanket order.
Request a quote
Send us a drawing. We'll send back a plan.
Material, tolerance, finish and lead time — usually within two working days. You'll talk to an engineer who can scope the job, not a call centre.